333 An account for this domain and user could not be found. Check that this user has a valid user account in the specified domain.
334 Only administrators are permitted to run this tool.
335 The RunAs user name cannot be blank.
336 The RunAs password cannot be blank.
338 LocalService
339 _LocalService
340 RemoteServerName
341 Changes have been applied but will not take effect until this machine is rebooted. Reboot now?
342 ActivateAtStorage
343 RunAs
344 Interactive User
345 AccessPermission
346 LaunchPermission
347 Y
348 LocalServer32
349 _LocalServer32
350 LocalServer
351 _LocalServer
352 CLSID
353 AppID
354 NULL
356 Client is anonymous to server
358 Use anonymous authentication
360 Server has information about client (no impersonation)
362 The CLSID %1, item %2 and title %3 has the named value AppID, but is not recorded under \\HKEY_CLASSES_ROOT\AppId. Do you wish to record it?
363 DCOM Configuration Warning
364 Access
365 Launch
366 Config
367 \SOFTWARE\Microsoft\OLE
368 Clsid
369 EnableDCOM
370 LegacyAuthenticationLevel
371 LegacyImpersonationLevel
372 LegacySecureReferences
373 DefaultAccessPermssion
374 DefaultLaunchPermission
375 HKEY_CLASSES_ROOT
376 Allow
378 Deny
379 Registry Value
380 Browse for Users
381 SCM:
382 The Security Descriptor contains an Access Control Entry (ACE) inappropriate to this context. If you continue it will be rewritten as an Allow ACE on the appropriate access mask. Do you wish to continue?
383 \
384 Key Read
385 Query Value
386 Set Value
387 Create Subkey
388 Enumerate Subkeys
389 Notify
390 Create Link
391 Delete
392 Write DAC
393 Read Control
394 Read
395 Full Control
396 Special Access...
397 Registry Key
398 Registry Application
399 Write Owner
401 Effective = True - only NT security settings set to on are included in token
402 Dynamic security token if set - static otherwise
403 Windows NT Machine Name
404 Service or application name (no backslash)
405 Four octet internet address or DNS host name
406 Internet port number
407 Integer between 0 and 255. 0 -32 reserved.
408 Windows NT Server name (backslashes optional)
409 Windows NT named pipe -start with "\\pipe"
410 Integer between 0 and 65535
411 IPX Internet address or Windows NT sever name
412 DECnet area and node syntax
413 DECnet phase IV object number
414 Windows NT machine name optionally followed by @ AT zone
415 AppleTalk endpoint string (max 22 chars)
416 StreetTalk server (item@group@organization)
417 Vines SPP port number (250 - 511)
418 Use dynamically assigned endpoints for Internet port range
419 Use dynamically assigned endpoints for intranet port range
420 Connection-oriented Netbios over TCP
421 Connection-oriented Netbios over IPX
422 Connection-oriented NetBEUI
423 Connection-oriented TCP/IP
424 Connection-oriented named pipes
425 Connection-oriented SPX
426 Connection-oriented DECnet transport
427 AppleTalk DSP
428 Connection-oriented Vines SPP transport
429 Datagram UDP/IP
430 Datagram IPX
431 Local RPC call
432 Use static endpoint for this protocol
433 Select the DCOM network protocol sequence that you want to add. Enter the endpoint details and click OK when you have finished.
434 Select DCOM protocol and endpoint
435 Modify the endpoint details if desired and click OK when you have finished.
436 DCOM Endpoint Properties
437 Use dynamic protocols for intranet
438 Use dynamic protocols for internet
440 ... default system protocols ...
441 Cannot add duplicate of existing protocol sequence
442 Tunneling TCP/IP
443 Enter port or port range in the form nnnn or nnnn-mmmm. For example "695" or "695-700"
444 Invalid port range format: Use a single number such as 500 or a range in the form xxxx-yyyy such as 500-1000.
445 Use the port ranges controls to add or remove port ranges from the port categories for use with packet filtering or firewall software.
446 You are attempting to write to the read-only user database on an NT Backup Domain Controller. Should DCOMCNFG write to the Primary Domain Controller Database instead ? (if in doubt, contact your system administrator)
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61446 an unnamed file
61457 &Hide
61472 No error message is available.
61473 An unsupported operation was attempted.
61474 A required resource was unavailable.
61475 Out of memory.
61476 An unknown error has occurred.
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61707 System registry entries have been removed and the INI file (if any) was deleted.
61708 Not all of the system registry entries (or INI file) were removed.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61720 Please enter a date and/or time.
61721 Please enter a currency.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61836 Unable to read write-only property.
61837 Unable to write read-only property.
61840 Unable to load mail system support.
61841 Mail system DLL is invalid.
61842 Send Mail failed to send message.
61856 No error occurred.
61857 An unknown error occurred while accessing %1.
61858 %1 was not found.
61859 %1 contains an invalid path.
61860 %1 could not be opened because there are too many open files.
61861 Access to %1 was denied.
61862 An invalid file handle was associated with %1.
61863 %1 could not be removed because it is the current directory.
61864 %1 could not be created because the directory is full.
61865 Seek failed on %1
61866 A hardware I/O error was reported while accessing %1.
61867 A sharing violation occurred while accessing %1.
61868 A locking violation occurred while accessing %1.
61869 Disk full while accessing %1.
61870 An attempt was made to access %1 past its end.
61872 No error occurred.
61873 An unknown error occurred while accessing %1.
61874 An attempt was made to write to the reading %1.
61875 An attempt was made to access %1 past its end.
61876 An attempt was made to read from the writing %1.
